Lumen Radio

Designed to meet the requirements of entertainment lighting; withstanding wear & tear of touring, rental and stage use.

CRMX NOVA TX2 RDM

Description

CRMX Nova TX2 RDM is a DMX/RDM transmitter for two DMX/RDM universes of up to 1024 channels at maximum refresh rate. With extensive support for Ethernet based protocols, it can not only transmit any protocol to listening CRMX receivers, but also act as a wired protocol converter at the same time. Any protocol, both DMX and Ethernet, can be used in any direction. Input DMX and output Ethernet, or the other way around. Merge DMX and Ethernet for redundancy. Use it together with our prized CRMX SuperNova RDM controller and management software, or as an RDM proxy with any other RDM compliant controller on the market.

Based on our advanced CRMX technology, the CRMX Nova TX2 RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. With support for CRMX Unity, the CRMX Nova TX2 RDM can act as a cross-protocol hub in any DMX system, wired or wireless. Multiple CRMX Nova TX2 RDM units can be combined to transmit several DMX/RDM universes, allowing easy system expansion. The CRMX Nova TX2 RDM is compatible with all other CRMX products, both indoor and outdoor, DMX and RDM.

CRMX Nova TX2 RDM utilizes the international license free ISM band on 2.4GHz.

Supported protocols

  • USITT DMX512, DMX512(1990) & DMX512-A
  • RDM ANSI E1.20 (Controller and Proxy)
  • Streaming ACN (Draft and Final)
  • ArtNet I, II & 3
  • Pathport
  • Strand ShowNet
  • ETCNet 2 & 3
  • KiNet V1 & V2

Power

  • High voltage input: 85-264VAC / 47-70Hz / 22W
  • Low voltage input: 12VDC ±20% / 12W
  • Overvoltage and ESD protected power inputs
  • PoE, Power over Ethernet

Physical

  • Dimensions (W x H x D): 220 x 44 x 160 mm (8.6″ x 1.7″ x 4.9″)
  • Weight: 900g, 30oz
  • Enclosure: Anodized extruded aluminum

RF characteristics

  • Operational frequency range: 2402-2480 MHz
  • Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
  • Tested link range: up to 1000 meters line-of-sight

Connectors

  • DMX: 2 XLR Neutrik® 5-pin gold plated male (self terminated)
  • Antenna: 2 RP-TNC male
  • Ethernet: 1 Neutrik® Ethercon™ RJ45
  • AC: IEC 320-C14 male
  • DC: Pluggable terminal strip, Phoenix® MSTD 2,5

CRMX NOVA FX RDM

Description

Be a part of the Flex(ible) revolution with the PLASA Innovation Award winning CRMX Nova™ FX RDM.

CRMX Nova FX RDM is a Flex product, meaning that it can be configured either as a transmitter or receiver. It supports one DMX/RDM universe of up to 512 channels with maximum refresh rate. The extensive support for Ethernet based protocols combined with the power of the Flex platform makes it a true swiss army knife for lighting professionals. In transmitter mode, all supported Ethernet protocols can be used in any direction, both as input and output. In receiver mode, it can output any supported Ethernet protocol alongside standard DMX and RDM. Use it together with our prized CRMX SuperNova RDM controller and management software, or as an RDM proxy with any other RDM compliant controller on the market.

Based on our advanced CRMX technology, the CRMX Nova FX RDM brings you all the advanced CRMX features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. With support for CRMX Unity, the CRMX Nova FX RDM provides never before seen flexibility for both wireless and wired DMX and RDM. Multiple CRMX Nova FX RDM units in transmitter mode can be combined to transmit several DMX/RDM universes, allowing for easy system expansion. The CRMX Nova FX RDM is compatible with all other CRMX products, both indoor and outdoor, DMX and RDM.

CRMX Nova FX RDM utilizes the international license free ISM band on 2.4GHz.

Supported protocols

  • USITT DMX512, DMX512(1990) & DMX512-A
  • RDM ANSI E1.20 (Controller and Proxy)
  • Streaming ACN (Draft and Final)
  • ArtNet I, II & 3
  • Pathport
  • Strand ShowNet
  • ETCNet 2 & 3
  • KiNet V1 & V2

Power

  • High voltage input: 85-264VAC / 47-70Hz / 10W
  • Low voltage input: 12VDC ±20% / 7.5W
  • Overvoltage and ESD protected power inputs
  • PoE, Power over Ethernet

Physical

  • Dimensions (W x H x D): 110 x 44 x 125 mm (4.3″ x 1,7″ x 6.3″)
  • Weight: 700g, 24oz
  • Enclosure: Anodized extruded aluminum

RF characteristics

  • Operational frequency range: 2402-2480 MHz
  • Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
  • Tested link range: up to 1000 meters line-of-sight

Connectors

  • DMX: 1 XLR Neutrik® 5-pin gold plated female
  • Antenna: RP-TNC male
  • Ethernet: 1 RJ45
  • AC: IEC 320-C14 male
  • DC: Pluggable terminal strip, Phoenix® MSTD 2,5

CRMX NOVA RX RDM

Description

CRMX Nova RX RDM is a receiver for one DMX/RDM universe being transmitted by any CRMX transmitter. It supports one full DMX/RDM universe of up to 512 channels at maximum refresh rate. Together with a RDM compliant CRMX Nova transmitter, the CRMX Nova RX RDM also supports RDM (ANSI E1.20). Use it together with our prized CRMX SuperNova RDM controller and management software to monitor signal strength and make settings from a remote location. Connect it to any RDM enabled fixture to get wireless feedback from the fixture.

Based on our advanced CRMX technology, the CRMX Nova RX RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. In addition to this, you will get the possibility to configure and monitor your fixtures over RDM, without having to drag a cable. To fit into old wireless systems with legacy equipment, the CRMX Nova RX RDM is compatible with W-DMX™ transmitters working on the 2.4 GHz band. Using it in this way will not allow you to make use of the benefits of the advanced CRMX technology or RDM.

CRMX Nova RX RDM is compatible with all other CRMX products, both indoor and outdoor, DMX and RDM.

CRMX Nova RX RDM utilizes the international license free ISM band on 2.4GHz.

Supported protocols

  • USITT DMX512, DMX512(1990) & DMX512-A
  • RDM ANSI E1.20

Power

  • High voltage input: 85-264VAC / 47-70Hz / 10W
  • Low voltage input: 12VDC ±20% / 2.5W
  • Overvoltage and ESD protected power inputs

Physical

  • Dimensions (W x H x D): 110 x 44 x 125 mm (4.3″ x 1,7″ x 6.3″)
  • Weight: 700g, 24oz
  • Enclosure: Anodized extruded aluminum

RF characteristics

  • Operational frequency range: 2402-2480 MHz
  • Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
  • Tested link range: up to 1000 meters line-of-sight

Connectors

  • DMX: 1 XLR Neutrik® 5-pin gold plated female
  • Antenna: RP-TNC male
  • AC: IEC 320-C14 male
  • DC: Pluggable terminal strip, Phoenix® MSTD 2,5